Gunner Insulation

"Licensed, Bonded and Insured"
PA: 007711 | NJ: 13VH05068900
Monday through Saturday 7:00 a.m. - 3:00 p.m. Evening Hours by Appointment      (215) 801-8280

Closed Cell Foam Bucks County

Gunner Insulation installs both open and closed cell foam in Bucks County, Pennsylvania and the surrounding areas.

Spray foam insulation not only provides a high R-value but the ability to reduce air intrusion, accumulation, radiative heat transfer and air movement. The application technology allows the spray polyurethane foam to expand, filling cracks, crevices and voids. This creates a "seamless" air barrier system that provides exceptional building envelope performance.

Spray foam is the "perfect fit" to improve the overall building performance package and create an energy efficient, climate controlled indoor environment.

Spray Polyurethane Foam Insulation reduces conductive heat transfer through the building envelope (measured by R-value). In addition, it also restricts heat flow through air movement and infrared radiation.

Spray Foam Saves You Money and Pays for Itself

SPF (Spray Polyurethane Foam) home insulation saves on energy costs and lowers utility bills. SPF is used to seal the entire “building envelope” of your home to prevent air and moisture infiltration. The US Department of Energy (DOE) studies show that 40% of your home’s energy is lost due to air infiltration. This air infiltrates the home in the form of drafts through walls sockets, windows and doorways.

Often times no expensive building wrap or additional vapor protection is required during construction when using SPF, saving money yet again.

High R-Value

Sprayed polyurethane foam has an aged R-value of approximately 6.0 per 1 inch thickness (depending on the particular formulation and application, higher values have been achieved), enabling it to provide more thermal resistance with less material than any other type of commercial insulation material. SPF systems are frequently used to insulate and protect a wide variety of residential, commercial, and industrial buildings.

Monthly energy and utility savings of 30% or greater can be achieved when compared to the alternative roofing and insulation systems. The cost of an SPF roof or insulation system can often be recovered in less than 5 years, simply through energy savings alone.

Closed Cell Foam Prevents Air, Moisture and Gas Infiltration

Studies have shown that as much as 40% of a building’s total energy loss is due to air infiltration. Traditional fiberglass insulation is only stapled, or placed into the wall cavities and does not seal the stud and wall cavities from end to end, or top to bottom. Air infiltration can pass through these gaps, making it far less efficient than SPF. SPF not only adheres to, but forms to the walls and floors to create a tight seal and insulating barrier that stops this air leakage. SPF also boasts the highest R-value per inch than any other commercial material, (upwards of R-7.0, compared with Fiberglass at R-3.5) making your home more comfortable and less expensive to heat in the winter, and cool in the summer.

Since SPF acts as an air barrier, it also helps to reduce moisture infiltration, which is a source of dangerous mold and mildew growth in the home, and can cause severe health problems to its occupants. So save your family and save money at the same time with SPF home insulation systems. Moisture infiltration can also cause structural damage to your home or building.

Closed Cell Foam Helps Reduce Moisture and Mold

Molds produce tiny spores to reproduce. Mold spores waft through the indoor and outdoor air continually. When mold spores land on a damp spot indoors, they may begin growing and digesting whatever they are growing on in order to survive. There are molds that can grow on wood, paper, carpet, and foods. When excessive moisture or water accumulates indoors, mold growth will often occur, particularly if the moisture problem remains undiscovered or un-addressed. There is no practical way to eliminate all mold and mold spores in the indoor environment; the way to control indoor mold growth is to control moisture. SPF insulation is the key. Watch Video...

Closed Cell Spray Foam Enhances Overall Building Stability

Since SPF is seamless and monolithic, foam sprayed into the walls enhances overall building stability and reduces “rack and sheer.”

Spray Foam Insulation Deadens Sound Travel and Noise

SPF also reduces airborne sound making the home acoustically tighter and more private from room to room.

Benefits of Spray Foam Insulation


  • - Stops air and moisture infiltration
  • - Makes your home more comfortable
  • - Saves on energy costs
  • - Adds strength to the building structure
  • - It is permanent and will not sag
  • - Keeps dust and pollen out
  • - Reduces capacity requirements, maintenance and wear of HVAC equipment